|
|
|
Fuel filter replacement procedure for 2001 BMW X5 4.4i in the attached pdf document. 
|
Posted by xmac
- Last Activity 08-10-2008 03:50 AM
by xmac 
|
|
|
|
|
|
|
Thermostat & Water Pump DIY
by Ernest aka Bimmer360
Disclaimer:
Bimmer360 is not responsible or liable for any damage of any property or injury resulted in performing this DIY. It is highly recommended to implement safety procedures at all times.
Vehicle Info:
2001 BMW X5 4.
|
Posted by Bimmer360
- Last Activity 05-28-2008 05:40 AM
by Bimmer360
|
|
|
|
|
|
|
Here is my contribution for the X5world members. It's my way of saying thank you for a very useful and informative website. UCrew, feel free to post this on the homepage.
Spark Plug Replacement DIY
by Ernest aka Bimmer360
Disclaimer:
Bimmer360 is not responsible or liable for any damage of a
|
Posted by Bimmer360
- Last Activity 01-21-2008 11:18 PM
by Bimmer360
|
|
|
|
|
|
|
Been doing intensive repairs, upgrades, and customizing to my E38 within the past couple weeks, and thought about sharing this with my fello X5'ers out there that have thought about doing this.
Note the following was done to my valve covers off my E38. The same procedure will apply to the
|
Posted by Ecko
- Last Activity 04-24-2007 12:32 PM
by Ecko
|
|
|
|
|
|
|
Idle Control Valve (ICV) 01 3.0 X5 with code P0505
All you need is screw driver, a torch wrench, and a socket size 10. The process takes about 15min. and it is very easy.
<o></o>
There are two screws (follow the blue arrows) on this box (mark with letter A), one is on the side and one
|
Posted by ALX5
- Last Activity 07-04-2006 10:04 PM
by ALX5
|
|
|
|
|
|
|
A DIY article on how to change the exhaust sensor and intake sensor in a 3.0 liter BMW X5
|
Posted by ALX5
- Last Activity 05-30-2006 09:08 PM
by ALX5
|
|
|
|
|
|
|
BMW issued SI 00 04 01 on October 25, 2001 to clarify the oil change situation for low annual mileage owners.
“A limited number of BMW owners accumulate very low mileage on their BMWs annually, in some situations insufficient for the Service...
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
I wanted to give something back to x5 world for all the help you guys have given over the years. I hope this post clears up any problems that anyone might have with their cam sensors tripping error codes. On a scale of 1-10 for a diy'er like me i...
|
Posted by mixman812
- Last Activity 01-09-2006 11:05 AM
by mixman812
|
|
|
|
|
|
|
Contributed by: Kewl X5
First of all, I want to let everyone know that Evosport did finally
ship the package and it arrived late in my office complex Friday
afternoon. However, the package went to the wrong suite somehow and
finally my staff got the package. So, Evosport has been forgive
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
|
|
|
|
|
CV Joint stands for "Constant Velocity Joint" and is used when ever torque must be transfered at an angle WITHOUT VIBRATION which must be done with the drive axles (front wheels turn and all 4 wheels move up/down).
|
Posted by X5world
- Last Activity 01-09-2006 11:05 AM
by X5world
|
|
