Hi,

For the MK3 you need to burn the Software CD at Mode2.....
(search this forum, you wil find mode2cdmaker)


BertusE46

__________________

I wrote down on the smallest speed in mode2 not what results!
And DIS that can than to help?

I insert a disk with a software into navigation of 5-7 minutes will twist also not what results the screen black sometimes that that blinks! Sometimes I sit down in the car there is a menu on the screen only without an inscription NAVI!

Try a old version first, then the new one.
So burn a V17-V20 or some else in Mode2 at the slowest speed, then check the CD for errors and put it in you Mk3

Many thanks! I will try!!!

No, either DIS or INPA will not help because...
IBus is not see you navi 'cause it's dead or "out of memory".....

Follow the advices (above) and maybe would be good to start from resetting your navi - close all doors, open only trunk, wait till your navi goes to sleep (LED in the front goes down), disconnect you navi for 15-20 min, connect again and try to update by the good SW burned in Mode2

Good luck